SMOK G4 TF-RTA
SKU:
A$36.00
A$36.00
1 available
SMOK G4 TF-RTA
Great for (DL) Vaping!
How to tame this "Beast of Cloud" ?
With the newest TF-RTA Tank from SMOK! it's just 3 steps:
1. Cut a strip of cotton;
2. Build your coils
3. Use your hands and the screwdriver to start with:
Super big off-base deck, so easy to build; hidden sealing ring and innovative juice flow control system can significantly solve the leaking problem; patented swivel-cap design makes top-filling as easy as it gets; and adjustable airflow system with four large air slots at the base, you can control airflow as you like!
Ace, you've done it!
Note: This is not for MTL vaping (mouth to lung).
This is for MEGA Clouds Direct Lung Inhale!
Specifications:
Size (height x diameter): 65mm x 24.5mm
Capacity: 4.5ml
Material: Glass & Stainless Steel
Threading: 510
What’s in the box:
SMOK TF-RTA (G4 edition)
1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G4 Deck (Pre-installed)
1 x Screwdriver for G4 Deck
1 x Replacement Glass tube
1 x SMOK Vape band
1 x User manual
Spare Parts
HOW TO BUILD THE RTA(G4)
1. Before starting make sure your hands are clean.
2. Taking the TF-RTA G4 deck apart.
3. Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4. Position and cut the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the wick at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
Great for (DL) Vaping!
How to tame this "Beast of Cloud" ?
With the newest TF-RTA Tank from SMOK! it's just 3 steps:
1. Cut a strip of cotton;
2. Build your coils
3. Use your hands and the screwdriver to start with:
Super big off-base deck, so easy to build; hidden sealing ring and innovative juice flow control system can significantly solve the leaking problem; patented swivel-cap design makes top-filling as easy as it gets; and adjustable airflow system with four large air slots at the base, you can control airflow as you like!
Ace, you've done it!
Note: This is not for MTL vaping (mouth to lung).
This is for MEGA Clouds Direct Lung Inhale!
Specifications:
Size (height x diameter): 65mm x 24.5mm
Capacity: 4.5ml
Material: Glass & Stainless Steel
Threading: 510
What’s in the box:
SMOK TF-RTA (G4 edition)
1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G4 Deck (Pre-installed)
1 x Screwdriver for G4 Deck
1 x Replacement Glass tube
1 x SMOK Vape band
1 x User manual
Spare Parts
HOW TO BUILD THE RTA(G4)
1. Before starting make sure your hands are clean.
2. Taking the TF-RTA G4 deck apart.
3. Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4. Position and cut the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the wick at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
