Joyetech eGrip VT
SKU:
A$39.95
A$19.95
A$19.95
per item
All in one vape Joyetech quality
Great for (MTL) Vaping!
Joyetech eGrip VT Variable Temperature Control system, supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode with an OLED screen.
It also boasts a 360-degree regulation ring to adjust output wattage or temperature.
The compact size & comfortable to hold.
Features:
Variable Temperature Control
Supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode
360-degree regulation ring
Multiple colors
Easy to clean
Specification:
Size: 46.4mm*20.4mm*99.5mm (including mouthpiece)
Battery Capacity: 1500mAh
Output Mode: VT-Ni/VT-Ti/VW Mode
E-juice Capacity: 3.6ml
Resistance Range:
0.2-1.0ohm for VT mode
0.4-3.5ohm for VW mode
Package Content
1 x eGrip Mouthpiece
1 x eGrip VT body
1 x eGo ONE CL head 1.0ohm
1 × eGrip VT Vent Pipe
1 x eGrip CL base
1 x eGo ONE CL-Ni head 0.2ohm
1 x eGo ONE CL-Ti head 0.4ohm
1 x 1A Wall Adaptor
1 x USB Cable
1 x Manual & Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Opertion Guide:
1. Power on/off:
Press the fire button 5 times in quick succession to turn on/off the device.
2. Vaping:
Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
3. Shift between VT-Ni/VT-Ti/VW Modes:
Press the fire button for three times to shift between VT-Ni/VT-Ti/VW Modes when the battery is on.
(1)under VW mode, it presents: battery life, ohm, voltage and wattage.
(2)under VT mode, it presents: battery life, ohm, wattage, temperature and mode (Ni/Ti).
4. Adjust the wattage/temperature:
Under VW mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the wattage (5W-30W); under VT mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the temperature (100-315C/200-600F).
Rotate the ring faster clockwise or counterclockwise for continuous three grades, the device automatically increase or decrease 0.1W/5C(10F) numerically.
5. Regulation of air-inlet:
Spin the adjustment screw on the side of the button. Counterclockwise rotation will loosen the screw. The looser the screw is, the larger the air inlet is.
6. Atomizer head replacement:
Unscrew the cap on the bottom with the tiny tool in the box (or just a coin), you’ll see the atomizer head located right on the base. Then replace the head with a new one.
7. e-Juice Filling:
Push up the lid on the side of the body, then slowly refill the liquid into the hole. (Note: Don’t forget to lock the cap after finishing it.)
8. Vent Pipe Cleaning:
The vent pipe of eGrip VT is detachable. Take off the mouthpiece then use the tiny tool in the box (or just a coin) to unscrew the vent pipe from the top so as to clean it individually.
9. Charging:
Plug into the charging port at the bottom. It usually takes 2.5 hours to fully charge the battery via 1A wall adapter.
Buy replacement coils HERE
Joyetech eGrip VT Variable Temperature Control system, supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode with an OLED screen.
It also boasts a 360-degree regulation ring to adjust output wattage or temperature.
The compact size & comfortable to hold.
Features:
Variable Temperature Control
Supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode
360-degree regulation ring
Multiple colors
Easy to clean
Specification:
Size: 46.4mm*20.4mm*99.5mm (including mouthpiece)
Battery Capacity: 1500mAh
Output Mode: VT-Ni/VT-Ti/VW Mode
E-juice Capacity: 3.6ml
Resistance Range:
0.2-1.0ohm for VT mode
0.4-3.5ohm for VW mode
Package Content
1 x eGrip Mouthpiece
1 x eGrip VT body
1 x eGo ONE CL head 1.0ohm
1 × eGrip VT Vent Pipe
1 x eGrip CL base
1 x eGo ONE CL-Ni head 0.2ohm
1 x eGo ONE CL-Ti head 0.4ohm
1 x 1A Wall Adaptor
1 x USB Cable
1 x Manual & Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Opertion Guide:
1. Power on/off:
Press the fire button 5 times in quick succession to turn on/off the device.
2. Vaping:
Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
3. Shift between VT-Ni/VT-Ti/VW Modes:
Press the fire button for three times to shift between VT-Ni/VT-Ti/VW Modes when the battery is on.
(1)under VW mode, it presents: battery life, ohm, voltage and wattage.
(2)under VT mode, it presents: battery life, ohm, wattage, temperature and mode (Ni/Ti).
4. Adjust the wattage/temperature:
Under VW mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the wattage (5W-30W); under VT mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the temperature (100-315C/200-600F).
Rotate the ring faster clockwise or counterclockwise for continuous three grades, the device automatically increase or decrease 0.1W/5C(10F) numerically.
5. Regulation of air-inlet:
Spin the adjustment screw on the side of the button. Counterclockwise rotation will loosen the screw. The looser the screw is, the larger the air inlet is.
6. Atomizer head replacement:
Unscrew the cap on the bottom with the tiny tool in the box (or just a coin), you’ll see the atomizer head located right on the base. Then replace the head with a new one.
7. e-Juice Filling:
Push up the lid on the side of the body, then slowly refill the liquid into the hole. (Note: Don’t forget to lock the cap after finishing it.)
8. Vent Pipe Cleaning:
The vent pipe of eGrip VT is detachable. Take off the mouthpiece then use the tiny tool in the box (or just a coin) to unscrew the vent pipe from the top so as to clean it individually.
9. Charging:
Plug into the charging port at the bottom. It usually takes 2.5 hours to fully charge the battery via 1A wall adapter.
Buy replacement coils HERE
